加工定制 | 是 |
---|---|
用途 | 考古探寶儀 |
類型 | 金屬探測器 |
重量 | 0.8(kg) |
品牌 | 德國OKM振動雷達成像地探儀 |
型號 | 德國OKM雷達成像儀 |
中文簡介:
利用振動地下的結構的地球物理學測量方法号显,相似的空洞能被探測崇磁。 靈活的程序震動將會進入地面之內被產生而且傳輸期間医男。 運行時間和震動均被記錄部爱。 依照土壤條件標準的數據探測隱藏的物體场晶。
FS是探測地下的像洞肯锻,燃料庫的空洞拆楣,隧道或地下室窖的一個地球物理學的測定器具偷瀑。 FS是由地震的震動工作原理胚搂。 一個發射器產生討論地面的震動喉隙。 仰賴土壤的類型他們將會被傳輸或濕氣。 如果空虛存在脐炼,它將會開始在它自己的頻率方面共嗚和能被一個地震震動轉換器發現畏帖。 FS能在世界各地均可使用, 在無障礙的地面,沃土或泥土土壤, 在山區或平原的地區罩锐。
FS包括不同的操作模態記錄并且分析數據:
檢查模態認識地震的曲線奉狈。
掃描模態為圖解式的表現記錄測量?jī)r(jià)值
頻率-能源-曲線圖分析地震的活動
數據在 3D立體中為圖解式的表現轉移到計算機
被記錄的測量?jī)r(jià)值能在經由頻率被分析-能源-曲線圖。 在特定的頻率這一個圖表和一個大的開闊的地面顯示現有的地下空洞涩惑。 另外地概述對 3D立體表現的所有測量?jī)r(jià)值是可能的,所以他們能在專業的視覺型的人 3D立體軟件被分析仁期。 那樣,空虛能夠不但視覺上被表現 , 而且 , 他們的大小能被決定竭恬。
英文簡介:
With the geophysical measurement methods of seismics underground structures like cavities can be explored. During that active procedure vibrations will be generated and transmitted into the ground. Resulting from that process reflexions, travel time and vibrations can be recorded. According to the soil conditions the measured data gives clues to hidden objects.
FS-Reflexion is a geophysical measuring instrument to locate subterranean voids like caves, bunkers, tunnels or basement vaults. FS-Reflexion works with a seismic vibration system. A transmitter generates vibrations going into the ground. Depending on the type of soil they will be transmitted or damped. If a void exists it will start to resonate in its own frequency and can be detected by a seismic vibration transducer. FS-Reflexion can be used all around the world, no matter if there is stony ground, loam or clay soil, in the mountains or in flat country.
FS-Reflexion includes different operating modes to record and analyse data:
Check Mode to recognize seismic disturbances
Scan Mode to record measurement values for a graphical representation
Frequency-energy-graph to analyse seismic activities
Data transfer to computer for graphical representation in 3D
The recorded measurement values can be analysed via the frequency-energy-graph. In this diagram a high amplitude at specific frequencies indicates existing subterranean voids. Additionally it is possible to summarize all measurement values to a 3D representation, so that they can be analysed in the professional Visualizer 3D software. In that way voids cannot only be represented visually, but also their size can be determined.